Child’s play and directly in the epp chassis

RUCH NOVAPLAST provides a universal kit of various fixing elements, which are used depending on the application area.

  • Pressure-resistant and pressure-tight cable bushings with strain relief and bend protection,
  • Sensor receptacles,
  • Hose couplings and
  • active ventilation or drainage are possible directly in the EPP chassis.

Camlock® universal keys, hinge stop points, vibration absorbers etc. can be worked with in the area of fixing. The fixing of other component groups, such as control elements, can also be realised.

Secure fixing with M6 and M8

The particle foam ring of both elements is identical. The decisive factor for choice is the load that is to be absorbed.

The internal thread of the M6 (green) measures M6x1, that of the M8 (blue) M8x1.25.

The elements are used, for example, to screw the maintenance hatch to the ventilation equipment or to mount the unit on the wall.
If a hinge is necessary, two moulded parts that moveable in relation to each other can be fixed using NOVAfeed&fix®.

Feed through, close and seal with M25 and M40

The internal thread of the M25 measures M25x1.5,
that of the M40 measures M40x1.5.

The thread serves as an interface and thus offers multiple options, for example for feeding through and screwing in cables and hoses, for ventilation or drainage in technical building services equipment or for the realisation of Camloc fixings.

  • Technologically leading moulded parts.

  • Sustainable. Out of pure conviction.